200W Double Arm F6002 portable welding fume extractor High Efficiency
pre-filter 5pcs, Middle filter 1pc, active carbon filter 1pc
2 x 150m3/h
|Air Velocity:||2 x 11m/s|
Length of Duct:
Dia.75mmx1.4M or 55mmx1.2M
Less than 52dB
425 x 250 x 410mm
Waterun Fume Purifying and Filtering System is for cleaning of both
particles and gases. It is designed to filter the harmfull
substances, such as hydrocarbon and cyanide, during the process of
soldering, tin dipping in the solder pot, laser marking and
carving, printing, etc. It catches harmful smoke with freestanding
ducts and adjustable air volume to significantly improve your
It has a triple-filter system:
1) Pre-Filter: the large-size pad filter can filter large particles
2) Middle Filter: it filters the bigger powders for prolonging the
main filter's life.
3) Main Filter: it includes HEPA (high efficiency) filter and gas
filter. The HEPA cleans the gas and powders filtering from the
pre-filter and then carry them to the gas filter. which with the
carbon and other chemical combination, filters off the deleterious
substance and then outputs the clean air.
1. Metal body structure, strong and durable;
2. Noise reduction design, quiet operation;
3. Triple-filter design ensures thorough purification;
4. High-quality alloy fan achieves great suction power.
1. Compared with the products from foreign countries, our products
in terms of the effect is almost the same, but the majority of our
products are less than USD2000, so our products are cost-effective,
and the use of more affordable cost.
2. Self-developed impeller, better quality than ordinary plastic
impeller, more stable, more powerful suction. The unique tiered
filter design, can effectively purify the toxic and harmful
substances in the air, such as formaldehyde, benzene, ammonia,
radon gas, sulfur dioxide..etc, and use of low cost.
3. The products from abroad mainly purify the viruses and bacteria
as the main direction of governance. In China not only to purify
viruses, bacteria, but also clean harmful smoke pollution. WHO
estimates that there are over 200 million people deaths each year
due to inhalation of indoor and outdoor air pollution in small
4. Our company uses a brushless motor, compare with the ordinary
motor, this motor speed is higher, lower noise, it does not require
maintenance, but longer product life span.
1. How long need to to replace the pre-filter, middle filter and the
- Pre-filter : normally needs to replace by 1 months
- Middle filter: normally needs to replace by 3 months
- Main filter: normally needs to replace by 6 months.
2. What’s the functions for the filters?
- Pre-Filter/F8 pre-filter: the large-size pad filter can filter
large particles of dust (according the requirement to select
pre-filter or F8)
- PP Middle Filter/Fiber glass filter: it filters the middle-size,
small size particles bigger powders for prolonging the main
filter's life. (according the requirement to select PP middle
filter or fiber glass filter,can use both, the efficiency better.)
- Main Filter/Active carbon: it cleans harmful particles and fumes.
- High efficiency filter(combine middle filter and active carbon
filter): it can filter about 0.3micron particles and other harmful
3. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000
hours, consider environmental factors. Usually it can use 4-5 years
without any problems.
4. The ducts for the fume extractor can be shortened or lengthened?
Answer: It can be shortened or lengthened appropriate; but we
suggest not more than 1.5meter. For multi-station, the total pipe
length should not exceed 10 meters.
5. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.