Metal Industrial Portable Fume Extractor with Two Filtering
Absorbing the sawdust, woodchips from furniture manufacturing;
Absorbing the dust, powder, metal cut leads generated from
polishing, cutting, stamping processes.
All Accessories for F2000D Fume Extractor as below:
|Name of Parts||Qty||Specifications||Remarks|
|Main Unit||1 pc|
|Power Cord||1 pc||1.5M 10A/250V|
|Duct||1 pc||dia.100mm x 2M|
|Operation Instruction||1 pc|
|Prefilter Cartridge||1 pc||Placed inside the main unit|
|Active Carbon Cartridge||1 pc||Place inside the pre-filter|
|Remote Control||1 pc|
1. F2000D Dust Collector specially for absorbing the Dust , Power ,
Metal Cut Leads generated from polishing,cutting, stamping
2. Stepless speed regulating makes air quantity adjusted at will.
3. The dust filtering cartridge filtering the dust and power.
Active carbon cartridge inside purifying the harmful gases with the
filtring efficiency as high as above 95%.
4. The dust pre-filtering cartridge is reusable,can be wash for 8
times. Normally the active carbon cartridge needs to replace by 3-6
month if the machine working 8 hours/day.
5. Full-metallic framework structure design can resist strong
impact and vibration.
1. Brushless motor with low noise, small vibration, stable running,
long life-span, low electricity consumption, high efficiency (Zero
maintenance and zero consumables of brushless motor spare parts).
2. Equipped with the remote control, the operator can control the
machine from a distance.
3.With the intelligent control panel and digital display, the
operation becomes easy and simple. By pressing the button, you can
freely adjust the air volume and set the working time,. you can
achieve real-time monitoring on the working status.
4. The machine surface is made of metal, more corrosion resistance
5. Multiple filtering ensure through purifying efficiency
6. Front sight glass design to observe the dust in real time
Waterun Technology Co., Ltd, established in 2003, is located in
Shenzhen, China. We
are a leading manufacturer of Fume Extractors, which are widely
used for eliminating
Solder Fume, Laser Fume, Welding Fume, Chemical Fume, Medical Fume,
Waterun makes really effective Fume Extractors only. Our advanced
technology and high
quality has gained our leading position in the air purifying
industry. The filtering efficiency
of our Fume Extractors has reached the highest standard in the
1. What’s the advantage compare with ducted exhaust fan?
Answer: 1. Many advantages like (1) Clean the air quality (2)
energy saving (3) easy installation, flexible remove (4) low cost
(5) reduce the incidence of diseases and major diseases, and health
is priceless (6) to reduce unpleasant smell (7) to reduce dust and
other harmful substances, and so on.
2. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000
hours, consider environmental factors. Usually it can use 4-5 years
without any problems.
3. The ducts for the fume extractor can be shortened or lengthened?
Answer: It can be shortened or lengthened appropriate; but we
suggest not more than 1.5meter. For multi-station, the total pipe
length should not exceed 10 meters.
4. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.
5. Bent pipe will affect smoke purify?
Answer: Yes, it affect the suction power, it should reduce the bent
6. Can our fume extractor completely filtered poison gas?
Answer: No, there still no any kind of filter can filter out 100%
of poison gas, but you can make a different filter net rate upon